Skip to content

General settings

Requires the "General settings" permission.

The General settings page (menu CONFIGURATION → General settings) holds the rules that apply to all campaigns in the account: calendar hours, automatic retry rules, custom outcomes, work groups, clients and a few options for the automatic campaigns (Predictive and VoiceAI).

Where to find email and SMS

This page only contains the general settings: everything about email (SMTP, emails to agents, templates) is on the Email page. For SMS there is the SMS page.

All sections, except Work groups and Clients (which have their own save), are saved together with the Save button at the bottom of the page. If everything goes well, the green message "Settings saved." appears at the bottom (it disappears by itself after a couple of seconds); otherwise a red message explains what to correct.

Working hours

"Time slots in which operators can book appointments for agents, for each day of the week."

Field What it does
From / To Start and end time of the working day. The end time must be later than the start time
Days of the week One switch for each day: off = non-working day

A new account starts with 8:00–20:00, Monday to Friday.

Effect on operators: when they book an appointment, the calendar grid only shows the working hours and days, and the Save button stays disabled if the appointment falls outside working hours (see Booking an appointment). The same hours set the grid of the administrator Calendar and of the agents' calendar.

Operator inactivity alert

"Minutes of inactivity after which a working operator is highlighted in the dashboard." Set 0 to turn the alert off. It is only for you, in the Dashboard: operators see nothing.

Contact picking

When a campaign has many "Busy / No answer" callbacks, the never-contacted contacts at the bottom of the ordering may never be reached. With Priority to never-contacted contacts you decide how often Thelgo offers a never-contacted contact instead of following only the campaign ordering. It applies to both manual and automatic campaigns.

Option Behavior
Disabled (ordering only) Only the configured ordering is followed
25% (1 never-contacted every 4) On average one new contact every 4
33% (1 never-contacted every 3) On average one new contact every 3
50% (1 never-contacted - 1 contacted) Alternating new and already-contacted contacts (default for a new account)
100% (always never-contacted) All never-contacted contacts first

Retention of operations and Audit log

This page has no data cleanup section: after how many days the completed operations and the Audit log rows are deleted every night is decided by whoever manages the Thelgo platform, with a single setting that applies to all accounts. If cleanup is active, at the top of the Operations and Audit log pages you find the number of retention days (see Operations and Audit log).

Choose a retention period that fits your privacy rules

If for GDPR verification reasons you need to be able to trace who did what, export the Audit log regularly before the rows are deleted, or ask support to adjust the retention period. An export that can only be downloaded from the Operations page disappears together with its operation.

Automatic retry rules

"Rules that decide when and whether a contact is retried, based on the last outcome obtained." They apply to all campaigns.

Busy / no answer

Field What it does
Minimum wait hours / Maximum wait hours After a "Busy / No answer" outcome the contact goes back in the queue after a random number of hours between the minimum and the maximum (both included). The maximum must be greater than or equal to the minimum
Maximum attempts (no answer) After this number of consecutive "Busy / No answer" outcomes the contact is marked as "No answer" and is no longer contacted. 0 = rule not applied

The random wait prevents all busy contacts from being retried at exactly the same time. If the two hour fields are empty, Thelgo uses a fixed wait of 2 hours. A new account starts with 1–4 hours and 5 attempts.

The attempt count resets as soon as the contact gets a different outcome. The same threshold also applies to unanswered automatic Predictive/Voice AI calls.

Effect on operators: this is the "few hours" interval and the attempt limit described in the operator manual (see Outcomes and callbacks).

Convert to public after

Convert to public after (consecutive callbacks): a private callback postponed with "Call back" this many times in a row becomes public, that is, it can be offered to any operator of the campaign, so the contact does not stay stuck with a single operator. "0 = disabled, private callbacks are never converted to public." (default value).

Only for Predictive / Voice AI

These two fields only appear if the account has Predictive or Voice AI campaigns enabled.

Field What it does
Maximum attempts (unreachable) After as many consecutive "Unreachable" outcomes (unallocated number or rejected call) the contact is marked as unreachable and no longer contacted. 0 = not applied. Default: 2
Courtesy delay (hours) When the contact answers but no operator is free, the number must be called back with care: after this many hours, not with the short delay of "busy/no answer". 0 = not applied (callable again on the next pass). Default: 24

VoiceAI call answered but without an outcome

Section visible only if your account has VoiceAI campaigns enabled.

In the VoiceAI call answered but without an outcome box you read "What to do when the contact answered the voicebot but the call ended without the bot reporting an outcome. Applies to all VoiceAI campaigns." and you choose from a menu how to classify that call:

Option What happens to the contact
Busy/No answer (follows the callback policies and the maximum number of attempts; shown in reports as “No outcome from bot”) (default) The contact gets the Busy / No answer outcome: it goes back in the queue after the wait hours set in Busy / no answer and, once the Maximum attempts (no answer) is reached, it is marked as "No answer" and no longer called. In the Predictive/Voice AI report the call appears as No outcome from the bot
Not interested (Negative outcome) The contact gets the Negative outcome, which is final: it is no longer called in that campaign. The outcome is recorded as made by VoiceAI (system) and in the report the call appears as Handled by the bot

The rule only applies when the bot has not recorded any outcome: if the bot reported an outcome (even Busy / No answer or Call back), that outcome stays. It applies to all VoiceAI campaigns of the account, not per campaign. Like all the other sections, it is saved with Save at the bottom of the page.

Which one to choose

The default behavior is cautious: a contact who answered but whose conversation was interrupted (for example, they hung up right away) is called back later. Choose Not interested only if you prefer to close these contacts immediately.

Provvedimento 83 of 20 February 2014 (silent calls)

Section visible only if there is at least one active Predictive campaign. It contains two optional safeguards against "silent" calls (the contact answers and finds nobody), provided for by the Italian Data Protection Authority:

Option What it does
Single call If a contact answers without finding a free operator, the engine no longer calls them back on its own: the contact becomes a private callback of an operator chosen at random among those of the campaign, with the note given in Note assigned to the callback (required if the option is on)
Silent call control If the percentage of silent calls in the last hour exceeds the Maximum silent call percentage (from 1 to 100), the engine launches only one call per free operator, with no overdialing, until it drops back below the threshold

For details on the Predictive engine see Predictive report.

Custom outcomes

"Enable and rename up to three extra custom outcomes, available to operators while handling calls."

The lower part of the page shows the three Custom outcomes (each with the Active switch and the Name field) with the Save button, and below it the Clients section with the + Add client button.

For each of the three outcomes:

  1. Turn on the Active switch.
  2. Write the Name that operators will see (e.g. "Already a customer", "Wrong number"). The name cannot be empty; the field can only be edited while the outcome is active.
  3. Press Save.

By default the three outcomes are called "Dynamic 1", "Dynamic 2" and "Dynamic 3" and are off. In the APIs and webhooks they have the codes DINAMICO_1, DINAMICO_2 and DINAMICO_3 (see External API).

Effect on operators: an active custom outcome appears as a blue button in the Outcome panel. It behaves like a final outcome: the contact is closed and no longer called back in that campaign (see Outcomes and callbacks). Custom outcomes apply to all campaigns of the account.

Renaming an outcome that is already in use

The name is a label of the outcome, not a copy saved in each call: if you rename an outcome that is already in use, past calls will probably also appear with the new name in the reports. If the meaning changes, consider using another custom outcome instead of renaming.

Work groups

Section visible only with the "General settings" and "All work groups" permissions.

The Work groups section lets you split users, databases and campaigns between different teams: a group administrator only sees and manages what belongs to their groups or has no group. From here you create, rename and delete groups and assign their members (+ Add group, members icon, trash can). It has its own save, like Clients. As long as you create no group, nothing changes in the rest of the application.

All the details are on the Work groups page.

Clients

Clients are the customers on whose behalf campaigns run. Each campaign can be linked to a client and the campaign list can be filtered by client. Clients do not appear in the Users list and are managed only from here. You can also give a client Access to Thelgo so they can view the reports of their campaigns (see Client access); without access they cannot log in.

Whoever manages clients has the General settings permission; whoever has the Campaigns permission can only choose them in the campaign form and use them as a filter in the list. If work groups exist, an administrator without the All work groups permission only sees the clients of their groups and those without a group.

This section has its own save, independent of the page Save button: every change takes effect immediately.

Action How
Add + Add client button: in the New client popup enter First name, Last name and Email (all required, at most 100 characters; the email must be valid) and press Save. The same popup has the Access to Thelgo box (see below). If there is at least one work group you can assign, the popup also shows Work groups, with one switch per group (optional)
Edit Click the row: Edit client opens
Delete Trash can icon on the row: type the requested word in the confirmation field ("delete") and press Delete

Each row shows last name and first name, the email and the number of linked campaigns ("Linked campaigns: n"). If the client has access to Thelgo enabled, the label Access enabled appears next to the name. If you delete a client linked to campaigns, the campaigns stay but are unlinked from the client.

Email already in use

A client's email cannot be the same as the one used by another user (or client) of the account: Thelgo answers "A user with the email "…" already exists: use a different address."

After you enter at least one client, the Client choice appears in the campaign form and the client filter appears in the campaign list (see Campaign configuration and Campaign list).

The Clients section at the bottom of General settings shows, for each client, name, email and Linked campaigns, with the trash can to delete it; at the top right there is + Add client.

Client access

In the New client / Edit client popup, the Access to Thelgo box lets the client log in to Thelgo with their email and a password, to see only the reports of the campaigns assigned to them. Under the title you read: "Access is enabled with at least one permission and a password. The client only sees the campaigns assigned to them."

Field What it does
Call report The client sees the Call report of their campaigns
Campaign report The client sees the Campaign report of their campaigns
Password Appears as soon as you turn on one of the two switches. At least 8 characters; the eye icon (Show password / Hide password) shows what you type
  • Access is enabled when at least one switch is on and a password is set. With both switches off, access is off and the client cannot log in.
  • The password is required when you enable access ("Required to enable access."). If access was already enabled it is optional: leave it empty to keep it unchanged ("Leave blank to keep it unchanged."). Without a password of at least 8 characters the save button stays disabled.
  • When the password is filled in, next to Save the Create and send credentials button appears (for a new client) or Save and send credentials (for an existing one): it saves and sends the client an email with user name (their email), password and login link. With Save access is enabled without notifying anyone and you give the credentials to the client yourself. If the email cannot be sent, the red message "User saved, but the credentials could not be sent: check the email format in Settings." appears; the client is saved anyway. The email is the same one Thelgo sends to other users for their credentials (see Users).
  • To remove access, turn both switches off and save.
  • The client can reset the password on their own with Forgot your password? on the login screen (see Signing in and choosing the role), as long as their access is enabled.

What the client sees is described in Client area. The campaigns they see are those where they appear as Client (see Campaign configuration), regardless of work groups.

Other rules you will not find here

  • Email format for agents: it is in the New agent appointment tab of the Email page (see Emails to agents); the format of the daily summary is in the Agent appointment summary tab (see Appointment summary to agents).
  • Callback type (private/public), mandatory appointment on Positive and other specific rules: they are set in each campaign (see Campaign configuration).