Skip to content

Frequently asked questions

I don't see a campaign I should be working on.

You only see the campaigns the administrator has assigned you to. Also check the status filter in Your campaigns: with "In progress" the unavailable campaigns are hidden. If it is not there even with "All", ask the administrator to assign it to you.

The campaign is there but the button says \"Not active\".

The reason is shown under the campaign name: not started yet, ended, type not yet available, fixed extension missing. See the table in Unavailable campaigns.

I enter the campaign but \"No contact available right now in this campaign.\" appears.

No contact can be picked at this moment: they have been given a final outcome, they are waiting for the next attempt (busy or callbacks not yet due), they are blocked by the administrator, or they are being worked by colleagues or called by the automatic system. Try again later or tell the administrator.

If instead you read "Other operators are taking the same contacts right now: try again in a few moments.", they are still available but many colleagues are taking them at the same time as you: just try again after a moment.

I open a contact from search, from Callbacks or from Quality Check and a message appears instead of the record.

The message gives the reason for the block. For example: "This contact already has a final outcome.", "This callback is private and reserved for another operator.", "This contact is currently being worked on by another operator or is being called by the automatic engine.", "This contact is blocked in this campaign.", "This contact is in the Do-Not-Call Registry and is excluded from this campaign.", "This contact is not authorized to be contacted." (it has a Not authorized outcome or is anonymized), "This contact has no first-level Positive outcome to verify." or "This contact has already been verified in Quality Check." (these last two in Quality Check). Press Back to campaigns and choose another contact.

Does a contact blocked by the administrator still appear in Callbacks or in Quality Check?

No: contacts blocked by a campaign block rule are offered neither by the Callbacks page nor by the Quality Check queue, besides not being picked in normal handling. They cannot even be opened from Contact search: the message "This contact is blocked in this campaign." appears. The same applies to contacts registered with the Public Opposition Register. If a contact with a callback disappears from the list, it may have been blocked: ask the administrator.

\"The RPO list is not validated or has expired: this campaign cannot be worked on.\" appears.

The campaign's database is subject to the Public Opposition Register and its list has not yet been verified or has expired: until the administrator updates it you cannot work the campaign (neither pick contacts, nor open them from search or from Callbacks, nor open the Quality Check queue) and in Predictive campaigns no calls start. Tell the administrator.

I saved the wrong outcome. How do I correct it?

A saved outcome cannot be edited from the operator screen. If the outcome was not final (Call back, Busy / No answer), the contact will return to the queue anyway and you will be able to record the right one. Otherwise report the contact to the administrator. Pay particular attention to Not authorized, which blocks the contact in all campaigns: only the administrator can unblock it.

What is the difference between \"Call back\" and \"Busy / No answer\"?

With Call back you spoke to the contact and you agreed when to call back: date and time are mandatory. With Busy / No answer you did not speak to anyone: it is Thelgo that decides when to try again, after a few hours. See Outcomes and callbacks.

I set a private callback but I will be absent that day.

Private callbacks are reserved for you. If the campaign provides for it, a private callback postponed too many times becomes public. Otherwise, before you are absent, ask the administrator how to reassign it.

A colleague tells me to call a specific customer: how do I find them?

Use contact search, if you have the "Search contact" permission. If the customer is not in any list and you have the "Insert contacts" permission, you can add them yourself.

\"Maximum number of concurrently connected operators reached for this account.\" appears.

Your company has a limit on the operators connected at the same time and it has been reached right now. See Signing in.

I press the handset but the call does not start.

Read the red notice that appears at the bottom. Check that your phone or the phone system's app is on and connected. If the problem persists, contact the administrator: your extension may not be configured correctly.

In the Predictive waiting page no call arrives.

Check whether the notice "Your phone extension is not connected: you won't receive any calls until you connect it." appears. Remember that you must stay on the waiting page with the browser open. It may also be that at that moment no contact is answering: calls arrive only when someone answers. See Predictive campaigns.

\"Your Operator session is no longer active\" appeared.

Another role was selected with the same user, for example in another browser tab. Press Retry on the Campaigns page to become an operator again. See Choosing the role.

I can't find the \"Log out\" button.

It is at the bottom of the My profile page: click your name at the bottom of the side menu. Inside the x-bees app the button is not there, because x-bees handles signing out.